ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., I-3, 275-280, 2012
http://www.isprs-ann-photogramm-remote-sens-spatial-inf-sci.net/I-3/275/2012/
doi:10.5194/isprsannals-I-3-275-2012
© Author(s) 2012. This work is distributed
under the Creative Commons Attribution 3.0 License.
 
20 Jul 2012
VERIFICATION OF 3D BUILDING MODELS USING MUTUAL INFORMATION IN AIRBORNE OBLIQUE IMAGES
A. P. Nyaruhuma2,1, M. Gerke2, and G. Vosselman2 2Faculty of Geoinformation Science and Earth Observation (ITC), University of Twente, Hengelosestraat 99, P.O.Box 6, 7500AA, Enschede, The Netherlands
1School of Geospatial Sciences and Technology (SGST), Ardhi University, P.O.Box 35176, Dar es salaam, Tanzania
Keywords: Building, Revision, Edge, Matching, Fuzzy Logic Abstract. This paper describes a method for automatic verification of 3D building models using airborne oblique images. The problem being tackled is identifying buildings that are demolished or changed since the models were constructed or identifying wrong models using the images. The models verified are of CityGML LOD2 or higher since their edges are expected to coincide with actual building edges. The verification approach is based on information theory. Corresponding variables between building models and oblique images are used for deriving mutual information for individual edges, faces or whole buildings, and combined for all perspective images available for the building. The wireframe model edges are projected to images and verified using low level image features – the image pixel gradient directions. A building part is only checked against images in which it may be visible. The method has been tested with models constructed using laser points against Pictometry images that are available for most cities of Europe and may be publically viewed in the so called Birds Eye view of the Microsoft Bing Maps. Results are that nearly all buildings are correctly categorised as existing or demolished. Because we now concentrate only on roofs we also used the method to test and compare results from nadir images. This comparison made clear that especially height errors in models can be more reliably detected in oblique images because of the tilted view. Besides overall building verification, results per individual edges can be used for improving the 3D building models.
Conference paper (PDF, 1335 KB)


Citation: Nyaruhuma, A. P., Gerke, M., and Vosselman, G.: VERIFICATION OF 3D BUILDING MODELS USING MUTUAL INFORMATION IN AIRBORNE OBLIQUE IMAGES, ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., I-3, 275-280, doi:10.5194/isprsannals-I-3-275-2012, 2012.

BibTeX EndNote Reference Manager XML