ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., I-3, 63-68, 2012
http://www.isprs-ann-photogramm-remote-sens-spatial-inf-sci.net/I-3/63/2012/
doi:10.5194/isprsannals-I-3-63-2012
© Author(s) 2012. This work is distributed
under the Creative Commons Attribution 3.0 License.
 
19 Jul 2012
REGISTRATION OF LASER SCANNING POINT CLOUDS AND AERIAL IMAGES USING EITHER ARTIFICIAL OR NATURAL TIE FEATURES
P. Rönnholm and H. Haggrén Aalto University School of Engineering, Department of Real Estate, Planning and Geoinformatics, Finland
Keywords: Laser scanning, photogrammetry, orientation, feature, performance, reliability Abstract. Integration of laser scanning data and photographs is an excellent combination regarding both redundancy and complementary. Applications of integration vary from sensor and data calibration to advanced classification and scene understanding. In this research, only airborne laser scanning and aerial images are considered. Currently, the initial registration is solved using direct orientation sensors GPS and inertial measurements. However, the accuracy is not usually sufficient for reliable integration of data sets, and thus the initial registration needs to be improved. A registration of data from different sources requires searching and measuring of accurate tie features. Usually, points, lines or planes are preferred as tie features. Therefore, the majority of resent methods rely highly on artificial objects, such as buildings, targets or road paintings. However, in many areas no such objects are available. For example in forestry areas, it would be advantageous to be able to improve registration between laser data and images without making additional ground measurements. Therefore, there is a need to solve registration using only natural features, such as vegetation and ground surfaces. Using vegetation as tie features is challenging, because the shape and even location of vegetation can change because of wind, for example. The aim of this article was to compare registration accuracies derived by using either artificial or natural tie features. The test area included urban objects as well as trees and other vegetation. In this area, two registrations were performed, firstly, using mainly built objects and, secondly, using only vegetation and ground surface. The registrations were solved applying the interactive orientation method. As a result, using artificial tie features leaded to a successful registration in all directions of the coordinate system axes. In the case of using natural tie features, however, the detection of correct heights was difficult causing also some tilt errors. The planimetric registration was accurate.
Conference paper (PDF, 1957 KB)


Citation: Rönnholm, P. and Haggrén, H.: REGISTRATION OF LASER SCANNING POINT CLOUDS AND AERIAL IMAGES USING EITHER ARTIFICIAL OR NATURAL TIE FEATURES, ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., I-3, 63-68, doi:10.5194/isprsannals-I-3-63-2012, 2012.

BibTeX EndNote Reference Manager XML