ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-5/W3, 315-322, 2015
http://www.isprs-ann-photogramm-remote-sens-spatial-inf-sci.net/II-5-W3/315/2015/
doi:10.5194/isprsannals-II-5-W3-315-2015
© Author(s) 2015. This work is distributed
under the Creative Commons Attribution 3.0 License.
 
12 Aug 2015
Benchmarking Range-Based and Image-Based Techniques for Digitizing a Glazed Earthenware Frieze
G. Tucci, V. Bonora, A. Conti, and L. Fiorini GECO Lab., University of Florence - DICEA Dept., Via P.A. Micheli, 8, Florence, Italy
Keywords: Laser scanning, Photogrammetry, Comparison, Point Cloud, 3D models Abstract. 3D high resolution models can be produced both using range-based and image-based techniques. In this work, we evaluate the performance of the Photoscan commercial software in a challenging project: the digitization of an earthenware frieze of about 36 m in length. In order to choose the most effective technique and to define the best workflow for on-the-field data acquisition and the subsequent data elaboration, some tests were performed on a portion of the frieze. We discuss the results and compare the models resulting from different workflows with a reference data set taken from the scan data.
Conference paper (PDF, 17187 KB)


Citation: Tucci, G., Bonora, V., Conti, A., and Fiorini, L.: Benchmarking Range-Based and Image-Based Techniques for Digitizing a Glazed Earthenware Frieze, ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-5/W3, 315-322, doi:10.5194/isprsannals-II-5-W3-315-2015, 2015.

BibTeX EndNote Reference Manager XML