ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-5, 139-144, 2014
http://www.isprs-ann-photogramm-remote-sens-spatial-inf-sci.net/II-5/139/2014/
doi:10.5194/isprsannals-II-5-139-2014
© Author(s) 2014. This work is distributed
under the Creative Commons Attribution 3.0 License.
 
28 May 2014
Error analysis of motion correction method for laser scanning of moving objects
S. Goel and B. Lohani Geoinformatics Laboratory Department of Civil Engineering Indian Institute of Technology Kanpur Kanpur, Uttar Pradesh-208016, India
Keywords: Error Modelling, Motion Correction, GPS/INS Integration, Laser Scanning Abstract. The limitation of conventional laser scanning methods is that the objects being scanned should be static. The need of scanning moving objects has resulted in the development of new methods capable of generating correct 3D geometry of moving objects. Limited literature is available showing development of very few methods capable of catering to the problem of object motion during scanning. All the existing methods utilize their own models or sensors. Any studies on error modelling or analysis of any of the motion correction methods are found to be lacking in literature. In this paper, we develop the error budget and present the analysis of one such ‘motion correction’ method. This method assumes availability of position and orientation information of the moving object which in general can be obtained by installing a POS system on board or by use of some tracking devices. It then uses this information along with laser scanner data to apply correction to laser data, thus resulting in correct geometry despite the object being mobile during scanning. The major application of this method lie in the shipping industry to scan ships either moving or parked in the sea and to scan other objects like hot air balloons or aerostats. It is to be noted that the other methods of "motion correction" explained in literature can not be applied to scan the objects mentioned here making the chosen method quite unique. This paper presents some interesting insights in to the functioning of "motion correction" method as well as a detailed account of the behavior and variation of the error due to different sensor components alone and in combination with each other. The analysis can be used to obtain insights in to optimal utilization of available components for achieving the best results.
Conference paper (PDF, 12380 KB)


Citation: Goel, S. and Lohani, B.: Error analysis of motion correction method for laser scanning of moving objects, ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-5, 139-144, doi:10.5194/isprsannals-II-5-139-2014, 2014.

BibTeX EndNote Reference Manager XML