Volume II-2/W1
ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-2/W1, 279-284, 2013
https://doi.org/10.5194/isprsannals-II-2-W1-279-2013
© Author(s) 2013. This work is distributed under
the Creative Commons Attribution 3.0 License.
ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-2/W1, 279-284, 2013
https://doi.org/10.5194/isprsannals-II-2-W1-279-2013
© Author(s) 2013. This work is distributed under
the Creative Commons Attribution 3.0 License.

  13 Sep 2013

13 Sep 2013

EXPERIMENT FOR INTEGRATING DUTCH 3D SPATIAL PLANNING AND BIM FOR CHECKING BUILDING PERMITS

L. van Berlo1, T. Dijkmans1, and J. Stoter2 L. van Berlo et al.
  • 1Netherlands organisation for applied scientific research TNO, PO Box 49, 2600 AA, Delft, the Netherlands
  • 2Delft University of Technology, Delft, the Netherlands

Keywords: BIM, Information Modelling, 3D data integration, City and Urban planning, Standards for geospatial technologies

Abstract. This paper presents a research project in The Netherlands in which several SMEs collaborated to create a 3D model of the National spatial planning information. This 2D information system described in the IMRO data standard holds implicit 3D information that can be used to generate an explicit 3D model. The project realized a proof of concept to generate a 3D spatial planning model. The team used the model to integrate it with several 3D Building Information Models (BIMs) described in the open data standard Industry Foundation Classes (IFC). Goal of the project was (1) to generate a 3D BIM model from spatial planning information to be used by the architect during the early design phase, and (2) allow 3D checking of building permits. The team used several technologies like CityGML, BIM clash detection and GeoBIM to explore the potential of this innovation. Within the project a showcase was created with a part of the spatial plan from the city of The Hague. Several BIM models were integrated in the 3D spatial plan of this area. A workflow has been described that demonstrates the benefits of collaboration between the spatial domain and the AEC industry in 3D. The research results in a showcase with conclusions and considerations for both national and international practice.