ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-3/W5, 3-9, 2015
https://doi.org/10.5194/isprsannals-II-3-W5-3-2015
© Author(s) 2015. This work is distributed under
the Creative Commons Attribution 3.0 License.
 
19 Aug 2015
AUTOMATIC CREATION OF STRUCTURAL MODELS FROM POINT CLOUD DATA: THE CASE OF MASONRY STRUCTURES
B. Riveiro1, B. Conde-Carnero1, H. González-Jorge2, P. Arias2, and J.C. Caamaño1 1Applied Geotechnologies Group, Dept. Materials Engineering, Applied Mechanics and Construction, University of Vigo, Campus Lagoas-Marcosende, CP 36310 Vigo, Spain
2Applied Geotechnologies Group, Dept. Natural Resources and Environmental Engineering, University of Vigo, Campus Lagoas- Marcosende, CP 36310 Vigo, Spain
Keywords: Point clouds, Automatic Processing, Watershed segmentation, Structural Models, 3D Modelling, Masonry walls Abstract. One of the fields where 3D modelling has an important role is in the application of such 3D models to structural engineering purposes. The literature shows an intense activity on the conversion of 3D point cloud data to detailed structural models, which has special relevance in masonry structures where geometry plays a key role. In the work presented in this paper, color data (from Intensity attribute) is used to automatically segment masonry structures with the aim of isolating masonry blocks and defining interfaces in an automatic manner using a 2.5D approach. An algorithm for the automatic processing of laser scanning data based on an improved marker-controlled watershed segmentation was proposed and successful results were found. Geometric accuracy and resolution of point cloud are constrained by the scanning instruments, giving accuracy levels reaching a few millimetres in the case of static instruments and few centimetres in the case of mobile systems. In any case, the algorithm is not significantly sensitive to low quality images because acceptable segmentation results were found in cases where blocks could not be visually segmented.
Conference paper (PDF, 2502 KB)


Citation: Riveiro, B., Conde-Carnero, B., González-Jorge, H., Arias, P., and Caamaño, J. C.: AUTOMATIC CREATION OF STRUCTURAL MODELS FROM POINT CLOUD DATA: THE CASE OF MASONRY STRUCTURES, ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-3/W5, 3-9, https://doi.org/10.5194/isprsannals-II-3-W5-3-2015, 2015.

BibTeX EndNote Reference Manager XML