3D MAPPING OF CULTURAL HERITAGE: SPECIAL PROBLEMS AND BEST PRACTICES IN EXTREME CASE-STUDIES
- 1School of Rural and Surveying Engineering, Aristotle University of Thessaloniki, Greece
- 2School of Spatial Planning and Development (Eng.), Aristotle University of Thessaloniki, Greece
- 3School of Civil Engineering, Aristotle University of Thessaloniki, Greece
- 4Faculty of Forestry and Natural Environment, Aristotle University of Thessaloniki, Greece
Keywords: Cultural heritage, Photogrammetry, Laser scanning, UAV-helicopter, 3D modeling
Abstract. Photogrammetrey has a long successful history in the area of 3D modelling and documentation of cultural heritage monuments. In some cases an extensive study, preparation and the application of novel solutions is required for the successful documentation and 3D modelling of monuments. In most of the cases the problem that we have to face is difficulties regarding accessing, photographing, and measuring the monument from the optimal distance, in combination with the need for a high spatial resolution mapping. This paper is highlighting the special problems and the novel solutions, performed during mapping of two significant cultural heritage monuments in Greece. The Roussanou monastery (1527–1529 A.C., Meteora, Center Greece) and its underlying rock, had to be photographed and measured from a far distance and measured with various spatial resolutions. In the lakeside Neolithic settlement of Dispilio (6.000 B.C., western Greece) the enclosure which is covered with vegetation above a height of 3 m, had to be measured with high spatial resolution. The combined use of a laser scanner, a digital camera equipped with a telephoto lens and UAV allowed the successful mapping and the production of orthophotomaps in each case.