Volume II-5/W2
ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-5/W2, 349-354, 2013
https://doi.org/10.5194/isprsannals-II-5-W2-349-2013
© Author(s) 2013. This work is distributed under
the Creative Commons Attribution 3.0 License.
ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., II-5/W2, 349-354, 2013
https://doi.org/10.5194/isprsannals-II-5-W2-349-2013
© Author(s) 2013. This work is distributed under
the Creative Commons Attribution 3.0 License.

  16 Oct 2013

16 Oct 2013

Enhanced detection of 3D individual trees in forested areas using airborne full-waveform LiDAR data by combining normalized cuts with spatial density clustering

W. Yao1, P. Krzystek1, and M. Heurich2 W. Yao et al.
  • 1Department of Geoinformatics, Munich University of Applied Sciences, 80333 Munich, Germany
  • 2Bavarian Forest National Park, 94481 Grafenau, Germany

Keywords: Full-waveform LIDAR, single tree detection, forestry, mean shift, understory

Abstract. A detailed understanding of the spatial distribution of forest understory is important but difficult. LiDAR remote sensing has been developing as a promising additional instrument to the conventional field work towards automated forest inventory. Unfortunately, understory (up to 50% of the top-tree height) in mixed and multilayered forests is often ignored due to a difficult observation scenario and limitation of the tree detection algorithm. Currently, the full-waveform (FWF) LiDAR with high penetration ability against overstory crowns can give us new hope to resolve the forest understory. Former approach based on 3D segmentation confirmed that the tree detection rates in both middle and lower forest layers are still low. Therefore, detecting sub-dominant and suppressed trees cannot be regarded as fully solved. In this work, we aim to improve the performance of the FWF laser scanner for the mapping of forest understory. The paper is to develop an enhanced methodology for detecting 3D individual trees by partitioning point clouds of airborne LiDAR. After extracting 3D coordinates of the laser beam echoes, the pulse intensity and width by waveform decomposition, the newly developed approach resolves 3D single trees are by an integrated approach, which delineates tree crowns by applying normalized cuts segmentation to the graph structure of local dense modes in point clouds constructed by mean shift clustering. In the context of our strategy, the mean shift clusters approximate primitives of (sub) single trees in LiDAR data and allow to define more significant features to reflect geometric and reflectional characteristics towards the single tree level. The developed methodology can be regarded as an object-based point cloud analysis approach for tree detection and is applied to datasets captured with the Riegl LMS-Q560 laser scanner at a point density of 25 points/m2 in the Bavarian Forest National Park, Germany, respectively under leaf-on and leaf-off conditions. The experiments lead to a detection rate of up to 67% for trees in the middle height layer and up to 53% for trees in the lower forest layer. It corresponds to an overall improvement in the detection rate of nearly 25% for forest understory compared to that obtained by the former method by extracting individual trees using normalized cuts segmentation solely.