ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume IV-2/W2
https://doi.org/10.5194/isprs-annals-IV-2-W2-279-2017
https://doi.org/10.5194/isprs-annals-IV-2-W2-279-2017
17 Aug 2017
 | 17 Aug 2017

A CASE STUDY IN DOCUMENTATION PRODUCTION AS LEARNING TOOLS BENEFITTING MULTIPLE STAKEHOLDERS

T. J. Truesdale, B. Hierlihy, and P. Jouan

Keywords: Heritage, Documentation, Surveys, Structure Report, Building Simulation, Building Information Modelling BIM, Conservation Planning, Conservation Management Plan

Abstract. The Fondation Strutt Foundation has taken on the conservation planning of the Strutt House as part of a P3 collaborative effort with the National Capital Commission (NCC). This paper will address three of the primary documents/data sets (documentary methodologies) being used on/for the Strutt House project. The Strutt House is a Recognized Federal Heritage Building and a significant example of Canadian modernist architecture. Stakeholder is a term often used in Architectural Projects reflecting an economic interest in success of the project. In conservation projects the stakeholder generally reflects social, cultural and/or economic interests in a given project. The Strutt House project has benefitted from stakeholders that have all been interested in the above, as well as the education of our future conservationists. The Strutt house was purchased from the architect’s daughter in 2010, and as part of the acquisition, a Heritage Structure Report was commissioned and produced by PTAH Consultants Inc., Architects. The report forms the first of the primary referenced documents of this paper, including: a comprehensive photographic record of existing conditions; and, a building simulation model of the house ‘as designed/built’. This HSR and the accompanying data/documents have been adopted as the basis of an evolving document in the development of the Conservation Plan including: additional heritage surveys and technologies; traditional drawings, photographic and video records; and, a series of workshops on the structural stabilization efforts, thermography scans, and smoke/blow-door (air pressure) testing. In 2016, Pierre Jouan, a Master’s thesis student from KU Leuvan, working with the Carleton University CIMS lab under the direction of Professor Mario Santana, and the FSF completed a 3-D scanning and photogrammetry workshop on the Strutt House and created a building information model (BIM model) from the collected data. The three primary documentation processes being addressed in this paper are really a series of directed research or focussed investigations resulting in a collection of data sets resolved -or combined- into a document. They will assist in the development of the long-term Programming and Conservation Management Plan of the Strutt House.