Volume IV-2/W4
ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., IV-2/W4, 363-369, 2017
https://doi.org/10.5194/isprs-annals-IV-2-W4-363-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 4.0 License.
ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., IV-2/W4, 363-369, 2017
https://doi.org/10.5194/isprs-annals-IV-2-W4-363-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 4.0 License.

  14 Sep 2017

14 Sep 2017

LINE SEGMENTATION OF 2D LASER SCANNER POINT CLOUDS FOR INDOOR SLAM BASED ON A RANGE OF RESIDUALS

M. Peter, S. R. U. N. Jafri, and G. Vosselman M. Peter et al.
  • University of Twente, Faculty ITC, Enschede, the Netherlands

Keywords: Segmentation, laser, 2D, residuals, SLAM, indoor

Abstract. Indoor mobile laser scanning (IMLS) based on the Simultaneous Localization and Mapping (SLAM) principle proves to be the preferred method to acquire data of indoor environments at a large scale. In previous work, we proposed a backpack IMLS system containing three 2D laser scanners and an according SLAM approach. The feature-based SLAM approach solves all six degrees of freedom simultaneously and builds on the association of lines to planes. Because of the iterative character of the SLAM process, the quality and reliability of the segmentation of linear segments in the scanlines plays a crucial role in the quality of the derived poses and consequently the point clouds. The orientations of the lines resulting from the segmentation can be influenced negatively by narrow objects which are nearly coplanar with walls (like e.g. doors) which will cause the line to be tilted if those objects are not detected as separate segments. State-of-the-art methods from the robotics domain like Iterative End Point Fit and Line Tracking were found to not handle such situations well. Thus, we describe a novel segmentation method based on the comparison of a range of residuals to a range of thresholds. For the definition of the thresholds we employ the fact that the expected value for the average of residuals of n points with respect to the line is σ / √n. Our method, as shown by the experiments and the comparison to other methods, is able to deliver more accurate results than the two approaches it was tested against.