HIGH SPEED VIDEOMETRIC MONITORING OF ROCK BREAKAGE
- 1Institute of Geodesy and Photogrammetry, ETH Zurich, Zurich, Switzerland
- 2School of Science, RMIT University, GPO Box 2476, Melbourne, Victoria 3001, Australia
- 3CSIRO Energy, PO Box 883, Kenmore, Queensland 4069, Australia
Keywords: Rock breakage, Comminution, High speed video, Stereo-photogrammetry
Abstract. Estimation of rock breakage characteristics plays an important role in optimising various industrial and mining processes used for rock comminution. Although little research has been undertaken into 3D photogrammetric measurement of the progeny kinematics, there is promising potential to improve the efficacy of rock breakage characterisation. In this study, the observation of progeny kinematics was conducted using a high speed, stereo videometric system based on laboratory experiments with a drop weight impact testing system. By manually tracking individual progeny through the captured video sequences, observed progeny coordinates can be used to determine 3D trajectories and velocities, supporting the idea that high speed video can be used for rock breakage characterisation purposes. An analysis of the results showed that the high speed videometric system successfully observed progeny trajectories and showed clear projection of the progeny away from the impact location. Velocities of the progeny could also be determined based on the trajectories and the video frame rate. These results were obtained despite the limitations of the photogrammetric system and experiment processes observed in this study. Accordingly there is sufficient evidence to conclude that high speed videometric systems are capable of observing progeny kinematics from drop weight impact tests. With further optimisation of the systems and processes used, there is potential for improving the efficacy of rock breakage characterisation from measurements with high speed videometric systems.